(905) 775-5901Talk to an estimator
Metallic epoxy retail floor by Epoxy Boss in Oakville, Ontario
2024
1,200
Sq Ft
Concrete Coating
Retail

Metallic Epoxy Floor Installation-Supplements King Oakville (1,200 Sq Ft Retail Space)

Epoxy Boss logo

Project Details

Application
Commercial
Industry
Retail
Material
Epoxy

Gallery

Gallery

Metallic epoxy coating in an Oakville retail space by Epoxy Boss
Modern retail store with a glossy metallic epoxy floor
Before and after of a metallic epoxy retail floor in Oakville
Slip-resistant metallic epoxy floor in a retail store
Metallic epoxy floor installation in an Oakville retail store
High-gloss metallic epoxy floor finish in Oakville, Ontario

Description

When Castone Construction brought us in for the new Supplements King location in Oakville, the challenge wasn’t just technical - it was strategic.

The space started with a fresh concrete slab, but like most new pours, it lacked the qualities required for a finished retail environment. The surface was porous, inconsistent in texture, and visually flat, with minor imperfections and no protective layer. Left untreated, this type of concrete would quickly become a liability - prone to dusting, staining, moisture intrusion, and long-term surface degradation, especially under the demands of a high-traffic retail setting.

But the real issue went deeper than performance.

Supplements King is a brand-driven environment built around energy, aesthetics, and customer experience. A dull, unfinished floor would immediately disconnect from that identity. The space needed to feel clean, premium, and intentional, not industrial or incomplete. At the same time, the floor had to withstand:

  • Constant foot traffic
  • Product shelving and equipment weight
  • Spills from supplements and liquids
  • Daily cleaning and maintenance cycles

The client couldn’t afford a floor that looked good for a few months and then deteriorated. They needed a system that delivered long-term durability, low maintenance, and strong visual impact - all while staying on schedule with other trades and project timelines.

Solution

To meet both the performance and branding requirements, we implemented a multi-layer metallic epoxy floor system engineered specifically for commercial retail environments.

The process began with mechanical surface preparation using diamond grinding, which removed surface laitance, opened the concrete pores, and created the proper profile for maximum adhesion. This step is critical - without it, even the best coating systems can fail prematurely.

Next, we addressed all visible imperfections through targeted crack repair and surface refinement, ensuring a smooth and uniform substrate. This created a flawless foundation for the coating system and eliminated potential weak points.

We then applied a 100% solids tinted epoxy basecoat, installed at the correct thickness to provide structural integrity, color depth, and a strong bonding layer for the metallic system. This base layer plays a key role in the durability and longevity of the floor.

The defining feature of the project came with the custom metallic epoxy application. Using controlled flow techniques, the coating was manipulated to create a dynamic, fluid, three-dimensional visual effect - delivering a high-end finish that aligns with the Supplements King brand. Unlike standard coatings, metallic epoxy adds movement, depth, and uniqueness to every square foot of the floor.

To complete the system, we applied a satin-finish polyurethane topcoat, which acts as a protective barrier against:

  • Abrasion and foot traffic
  • Chemical exposure
  • Scuffing and wear
  • Routine cleaning

This final layer ensures the floor remains easy to maintain, highly durable, and visually consistent over time.

Related Projects

Flake Garage Floor in King, Ontario
King Flake Garage Floor
~300
Sq Ft
Flakes System
King City
Garage Floor Coating
Flake Backyard Patio Coating in Vaughan, Ontario
Vaughan Flake Patio Coating
~400
Sq Ft
Flakes System
Vaughan
Patio
Flake Garage Floor in Innisfil, Ontario (2021)
Innisfil Flake Garage Floor 2021
~450
Sq Ft
Flakes System
Innisfil
Garage Floor Coating
Interior Epoxy Floor Coating in Guelph, Ontario
Guelph Interior Epoxy Floor
~200
Sq Ft
Metallic System
Basement & Indoor Spaces
Flake Entrance Landing and Steps in Barrie, Ontario
Barrie Flake Entrance & Steps
~100
Sq Ft
Flakes System
Barrie
Porch
Exterior Flake Entrance Coating in Halton Hills, Ontario
Halton Hills Exterior Flake Entrance
~150
Sq Ft
Flakes System
Halton Hills
Porch
Flake Garage Floor in Muskoka Lakes, Ontario
Muskoka Lakes Flake Garage Floor
~800
Sq Ft
Flakes System
Muskoka Lakes
Garage Floor Coating
Flake Floor Coating in Pickering, Ontario (2021)
Pickering Flake Floor Coating
~450
Sq Ft
Flakes System
Pickering
Garage Floor Coating
Flake Deck Coating in Tiny, Ontario
Tiny Flake Deck Coating
~300
Sq Ft
Flakes System
Tiny
Patio

Ready to Upgrade Your Floors?

Custom epoxy systems tailored for garages, basements, showrooms, patios, and industrial environments — combining industrial-grade durability with premium aesthetics.

How we work

Coated concrete floor by Epoxy Boss in Ontario
01

First Contact

Reach out by phone, email or our online form. We'll ask a few questions about your space, how it's used and the finish you have in mind, and review photos if you have them.
02

Quotation

Get a clear and accurate price using our online calculator for instant estimates, or connect with us directly for a detailed quote. For more complex projects, we can schedule an on-site visit to finalize all details.
03

Decision making

We help you choose the right system, finish, and colours based on your goals. From flake to solid or metallic systems, you will have full clarity and confidence in your selection.
04

Scheduling + 50% Deposit

Once everything is confirmed, we lock in your project date. A 50% deposit secures your spot, allowing us to allocate materials and crew accordingly.
05

Day of the project

Our team completes full surface preparation including grinding and crack repair, followed by precise application of your selected multi-layered system based on manufacturer specifications.
06

Project Review

We walk through the finished space with you to ensure satisfaction. After approval, the remaining 50% balance is collected and the project is officially completed.