A professional flake floor is built from the concrete up. We evaluate the slab, mechanically diamond-grind the surface, prepare cracks and defects, address moisture risks when required, install a coordinated pigmented base coat, broadcast decorative flakes to full rejection, refine the cured broadcast, and seal it with a protective topcoat. The system can continue across included steps and vertical edges for a more complete finished appearance.
Prepped and stable concrete foundation, repaired with polyurea.
Urethane primer, with a moisture membrane where slab testing calls for it.
Polyurea or polyaspartic basecoat matched to the flake blend.
Durable vinyl flakes broadcast to full rejection.
Polyaspartic or aliphatic topcoat, with aluminum oxide or quartz added for traction.
Dozens of flake blends and finishes, from quiet neutrals to bold, high-contrast colour.
The same system installs vertically, so cove bases, curbs and pony walls match the floor.
The seamless surface resists staining and cleans with a dust mop and mild detergent.
Polyaspartic topcoats hold their colour in sunlit garages and on outdoor surfaces instead of ambering or fading.
The flake profile adds grip where it matters most, including garage aprons, porches and entry steps where snow melts off boots and tires.
Most residential installations finish in a single day, with foot traffic the next morning.
Road salt, slush, meltwater and freeze-thaw cycles do not break the film down or lift it from the slab.
Shrugs off gasoline, motor oil, salt brine, de-icers and household cleaners without staining or softening.
Handles heavy traffic, rolling loads and hot-tire pickup without cracking or peeling.
