Location we serve
Concrete Coating & Epoxy Flooring in Ontario
Epoxy, polyaspartic and decorative flake floor systems across the GTA, York Region, Simcoe County, Halton and Muskoka. Most residential garages are completed in one to two days.
The Climate Problem
Why Ontario Floors Fail Early
Moisture moves through the slab
Basement and slab-on-grade floors often have no effective vapour barrier. Excess vapour emission lifts coatings from below. Measured to ASTM F1869 or F2170 — above the limit, the slab needs a mitigation membrane first.
Cold and damp interrupt the cure
Late fall through early spring sits outside the temperature range where standard epoxy cures predictably. We use cold-weather materials and heat so winter installations stay on schedule.
Road salt and freeze-thaw attack the slab
De-icing salt tracked into the garage plus repeated freeze-thaw cycles scale bare concrete and lift weak coatings. A sealed, properly bonded system keeps salt and meltwater out of the slab.
Hot tires pull weak bonds
Hot-tire pickup is a prep failure, not a product failure. We diamond grind to a CSP-3 profile instead of acid etching.
FAQ
What areas do you serve?
We service all of Ontario, with free on-site estimates provided within the GTA. For projects more than one hour from the GTA, travel and accommodation charges apply to the installation.
How much do you charge per square foot?
Our rates range from $6 to $35 per sq ft, depending on the slab condition, required repairs and the specific system you choose. Quotes are written in CAD with HST shown separately, and on-site estimates in the GTA are free.
What warranty do you provide?
We provide a written 5-year warranty for indoor residential floors and a 2-year warranty for outdoor and commercial work. It covers adhesion failures and workmanship-related defects under normal use, subject to the conditions outlined in the warranty.
Do you work in winter?
Yes, as long as temperature and curing requirements are met. We use industrial heat cannons and cold-weather materials so heated garages, basements and commercial spaces can be coated through the winter.
What does road salt do to an uncoated garage floor?
Cars carry snow and slush loaded with de-icing salt into the garage, where it melts and pools, often near the door and under the wheels. Bare concrete is porous and absorbs that water. When temperatures swing around freezing, moisture in the surface expands and contracts, and the combination with chlorides is a common cause of scaling and pitting.
A sealed or coated surface limits how much reaches the concrete, which is the main reason Ontario garages are coated at all.
Epoxy or polyaspartic for an Ontario garage?
Epoxy bonds well and builds thickness, which makes it a good base layer, but many epoxies can yellow in sunlight, which matters at a garage door. Polyaspartic topcoats are chosen for UV stability and faster return to service, and many can be applied across a wider temperature range.
Most Ontario garage systems use both. The right combination depends on the product data, your slab and how you use the garage.
How soon can I drive or walk on my new floor?
You can usually walk on the floor after 24 hours and park vehicles after 48–72 hours. Colder temperatures slow the cure, so your quote includes the exact return-to-service time for your system.
Can you install over cracked or pitted concrete?
No. We never install over damaged concrete. Full surface restoration and crack repair are part of our preparation process, because a coating is only as good as the slab beneath it.
Will the floor yellow or fade over time?
No. We use UV-stable topcoats that resist yellowing and keep the colour consistent for years.
Do you carry insurance?
Yes. We carry General Liability insurance and operate in line with Ontario health and safety requirements, with WHMIS training and WSIB coverage for every team member.
Ready to Upgrade Your Floors?
Custom epoxy systems tailored for garages, basements, showrooms, patios, and industrial environments — combining industrial-grade durability with premium aesthetics.
EPOXY BOSS
How we work
01
First Contact
Reach out by phone, email or our online form. We'll ask a few questions about your space, how it's used and the finish you have in mind, and review photos if you have them.
02
Quotation
Get a clear and accurate price using our online calculator for instant estimates, or connect with us directly for a detailed quote. For more complex projects, we can schedule an on-site visit to finalize all details.
03
Decision making
We help you choose the right system, finish, and colours based on your goals. From flake to solid or metallic systems, you will have full clarity and confidence in your selection.
04
Scheduling + 50% Deposit
Once everything is confirmed, we lock in your project date. A 50% deposit secures your spot, allowing us to allocate materials and crew accordingly.
05
Day of the project
Our team completes full surface preparation including grinding and crack repair, followed by precise application of your selected multi-layered system based on manufacturer specifications.
06
Project Review
We walk through the finished space with you to ensure satisfaction. After approval, the remaining 50% balance is collected and the project is officially completed.
EPOXY BOSS
