Epoxy
Hard-wearing base coat for indoor floors
24–48 hrs
Indoor
100% Solids
About
Epoxy is a two-component resin system that cures into a hard, dense layer bonded directly to prepared concrete. We use PE-100, a solvent-free epoxy, as the primer, base and body coat in most indoor systems — flake, quartz, solid-color and metallic floors. Its dense surface resists bacteria, moisture and common chemicals such as oil and cleaners, and it can be applied in multiple layers with full adhesion between coats. Epoxy is not UV-stable: in direct sunlight it ambers, so sun-exposed floors always receive a UV-stable topcoat.
Right Fit
Not For
- Direct sun. Pool decks, patios and driveways — epoxy ambers under UV and needs a UV-stable topcoat outdoors.
- Fast turnarounds. Plan on 24–72 hours before foot traffic and several days before vehicles.
- Damp slabs. High-moisture concrete needs a moisture barrier first.
Built for South Florida
How this material handles sun, humidity, damp slabs and coastal air
Sun & Heat
Not UV-stable. Indoors it performs well; any area with direct sun needs a polyaspartic or aliphatic urethane topcoat to prevent ambering.
Humidity
Cure slows in high humidity and the surface can blush. We install in controlled conditions and check the dew point before each coat.
Slab Moisture
Sensitive to vapor rising through the slab. We test every slab and install a moisture membrane where readings are high.
Salt Air & Pools
Not recommended for pool decks or coastal exteriors. Indoors, it resists salt residue tracked in from outside.
Explore Other Materials
Ready to Upgrade Your Floors?
Custom epoxy systems tailored for garages, basements, showrooms, patios, and industrial environments — combining industrial-grade durability with premium aesthetics.
EPOXY BOSS
