From Plain Concrete to a High-Performance Flake System Garage

Problem & Solution: From Basic Concrete to a Heavy-Duty, Flake System Garage

The Problem:

This 980 sqft garage in Lindsay Brantford, Ontario had a plain concrete floor that wasn’t built to last. While the surface was functional, it lacked protection against cracks, stains, and wear from daily vehicle traffic, heavy tool use, and exposure to moisture. The porous concrete absorbed oil, dirt, and water, making it hard to clean and prone to long-term damage. The homeowner wanted more than just a simple upgrade—they needed a garage floor that was tough, slip-resistant, and visually appealing, with added wall protection to prevent grime and water damage along the edges.

The Solution:

We installed a full flake system with an 8-inch vertical coating, ensuring maximum durability, slip resistance, and easy maintenance. The process began with mechanical grinding to remove surface imperfections and open up the pores for strong adhesion. Next, we repaired all cracks using industrial-grade polyurea, preventing future expansion. We then applied a polyurea/polyaspartic basecoat, designed to bond tightly to the concrete and provide long-lasting protection against moisture, oil, and tire wear. A full flake broadcast was applied for a seamless, textured finish, adding both durability and style. The 8-inch vertical coating along the walls created a protective barrier against dirt buildup, impact damage, and moisture exposure. Finally, we locked everything in with a polyaspartic topcoat infused with aluminum oxide for superior slip resistance, stain protection, and UV stability. Now, this garage is built to handle anything—from daily vehicle use to tough working conditions—while staying clean, safe, and looking sharp.

Task: Flake System Installation – 980 sqft Garage Transformation

• Surface Preparation – Grinding for Maximum Adhesion
  
  • We mechanically ground the entire concrete surface, removing any weak spots, dirt, or contaminants to ensure a perfect bond for the coating system.
• Crack & Imperfection Repair – Strengthening the Base
  
  • Step 1: Opened all cracks using precision grinding to remove weak edges.
  • Step 2: Filled them with industrial-grade polyurea, preventing future expansion.
  • Step 3: Re-ground the surface to blend the repairs seamlessly into the floor.
• Basecoat Application – The Foundation of Strength
  
  • Applied a polyurea/polyaspartic basecoat, designed for maximum durability, flexibility, and moisture resistance.
• Full Flake Broadcast – Texture, Style & Durability
  
  • 100% full-coverage vinyl flake broadcast, ensuring a slip-resistant, stylish, and ultra-durable finish.
• 8-Inch Vertical Coating – Extra Wall Protection
  
  • Extended the coating 8 inches up the walls, creating a seamless, impact-resistant, and easy-to-clean transition.
• Polyaspartic Topcoat – Sealing the Deal
  
  • Applied a high-performance polyaspartic topcoat, infused with aluminum oxide for extra grip, UV protection, and stain resistance.
• The Final Reveal – A Garage Built to Last
  
  • In just two days, this garage floor went from basic concrete to a heavy-duty, stain-proof, and slip-resistant powerhouse.

“Bro, this garage was just asking for an upgrade.”

We pulled up to this 980 sqft garage in Lindsay Brantford, Ontario, and at first glance, the concrete looked… fine. No major damage, no disasters—but that was exactly the problem. It was just bare concrete, and we all know how that story ends—oil stains that never come out, moisture seeping in, tire marks permanently etched into the surface, and eventually, cracks that start creeping up out of nowhere. The homeowner knew they had a perfectly good garage, but if they didn’t protect it now, they’d be stuck dealing with constant cleaning, maintenance, and repairs down the line.

"Alright, let’s make this thing bulletproof."

First, we ground the entire surface down, making sure the concrete was prepped and ready for maximum adhesion. Next, we tackled all existing cracks and imperfections, filling them with industrial-grade polyurea and smoothing them back down. Then came the polyurea/polyaspartic basecoat, which is basically the armor plating for garage floors—designed to handle vehicle traffic, oil spills, and anything else life throws at it. But we weren’t stopping there.

We hit it with a full flake broadcast, covering every inch of the floor for a seamless, slip-resistant, and high-end finish. Then, we coated 8 inches up the walls, because nobody wants grime, moisture, and scuff marks building up at the base of their garage. And finally, we locked everything in with a polyaspartic topcoat, infused with aluminum oxide for next-level grip, stain resistance, and UV protection—because a garage should be durable, easy to clean, and straight-up look amazing.

“Final result? An absolute game-changer.”

This garage isn’t just protected—it’s built to last. No stains, no slips, no cracks creeping up out of nowhere. Just a flawless, industrial-strength garage floor that looks like it belongs in a high-end auto shop. If your garage floor needs an upgrade before the damage sets in, you already know who to call. Epoxy Boss has you covered.